Melt Blown PP Filter Cartridge for Water Filter System

Product Description

Product Description

Melt-blown filter elements are formed from pure polypropylene particles through hot melting,spinning, and traction, and are made into tubular filter elements. Melt-blown filter elements have a wide range of chemical compatibility and can withstand strong acids and alkalis.
They are widely used filter elements in the liquid filtration industry.

Product Parameters

Product name:	PP meltblown filter cartridge
Filter material:	PP polypropylene
Filter rating:	1um, 3um, 5um, 10um, 20um, 30um, 60um
Length:	5",10",20",30",40"
PH:	1-13
Pressure difference:	Forward 0.4Mpa.
Working temperature:	<70ºC under 0.25 Mpa.
Sterilization:	Tolerate 126°C, 30 minutes online steam sterilization.
Endotoxin:	The water extract of the filter column is tested by IAL, and the endotoxin content is less than 0.5 EU/ml

Product Details

1. High filtration efficiency, accurate filter rating, uniform filter cartridge pores. Up to 85% filtration efficiency.

2. Low filtration resistance, high flow, high dirt holding capacity, and long service life. During the production process, the fiber diameter and gap are adjustable. The filter cartridge pore is small in the inner layers and large in the outer layers, which enhances its flow and dirt-holding capacity and makes the filter cartridge not easily clogged, thereby extending its service life.

3. High cleanness, no pollution to water quality, great resistance to acids, bases, organic solvents, and corrosion.

4. High strength. When the differential pressure between the filter inlet and outlet exceeds 0.4 MPa, the filter cartridge will not deform; when the temperature is greater than 90 °C, the filter efficiency will not be reduced.

5. It has high hydrophilicity after PP treatment and can absorb 10 times the weight of water, so it can be used in oil and water separation applications.

PLANE BRUSHED DESIGN

The plane design allows a larger area to contact the water source, increasing the contact area by more than 50%, resulting in greater flow and stronger dirt holding capacity.

TRENCH PROCESS

The fibers are finer, the structure is tighter, the density is higher,the dirt-holding capacity is stronger, and the purified water flow rate is increased.

NEEDLE PUNCHED GROOVE DESIGN

The groove design allows a larger area to contact the water source, increasing the contact area by more than 70%, resulting in greater flow and stronger dirt holding capacity.

INTERNAL THREAD STRUCTURE

The filter cotton uses an internal spiral design to increase the filtering area and increase the pressure resistance of the filter element.

Company Profile